Central heating manifold with valves and adapters, Size 1" x 16mm

The central heating manifold is an essential part of every efficient heating system, while at the same time decreases installation time and cost.

As low as €9.06 €7.55
Availability: In stock

A manifold based central heating system (star shaped) has several advantages over traditional "ring" system:

- Time required for installation is significantly reduced;

- Overall cost of the system is also reduced due to the lower number of fittings required (tees, elbows, etc.);

- Efficiency is increased. This is due to the fact that all radiators and/or underfloor heating pipes are feeded with hot water directly from the heating body (wood burning boiler stove, pellet boiler, solid fuel boiler). With the traditional "ring" system each consecutive radiator is feeded with cooler water which increases the time needed to heat the room and respectively the fuel needed.

The model has built-in valves and adapters on the ports.

Primary connection size (inlet/outlet) is threaded 1" and the port size is 16mm (for radiator pipes). Number of ports varies by model.

More Information
Warranty 2 Years
Weight (kg) 1.2000
Country of Manufacture
Model Manifold with valves and adapters
More Information
Connection pipe 16*2mm
Threaded connection 1"
Ship Bundle Items Together
Write Your Own Review
You're reviewing:Central heating manifold with valves and adapters, Size 1" x 16mm
Your Rating